FJ Cruiser Forum banner
1 - 13 of 13 Posts

· Banned
Joined
·
3,369 Posts
Discussion Starter · #1 ·
Need a good one in O.C.

There are about two 30 seconds away, but i need one a i can trust with my money. I need these stud's drilled out of my manifold and i physically can't do it so i have to pay.


suggestions?
 
G

·
Well, if you need an exhaust shop, then the one that's 2 minutes from my house is very good. I've used them for the last 5 vehicles I've had. Goldenwest Muffler.

However, there MUST be someone on here that can help you out....there are so many people with the know-how on here. If I had the tools and know-how, I'd help ya out, you know that!! But if you need manual labor, I'm your guy.
 

· Banned
Joined
·
3,369 Posts
Discussion Starter · #3 ·
The first problem is they hardened bolts. So insanely hard to drill through. If anyone has had experience with that, i'd love the help.. i can pay good monies.


Second problem, my sternum is fractured. So i have almost no grip laying on my back underneath the truck trying to vice grip them out or hold the drill up :-[
 
G

·
Well, if you can get the truck to me, I think I can get a little leverage and try to back them things outta there. Of course, we'll have to make a trip (about 5 miles) to the local Harbor Freight to get a propane torch to heat them thingies up to TRY to make it easier. Unless you have a torch already. I have a pencil torch, but can't find it.

Easy Matt.....;D
 
G

·
I'm off Thurs, Fri and Sat. Fri is OC Auto Show day (maybe...30% chance of going at this point in time) and Sat is Pomona Off Road Expo Day (definitely).
 
G

·
Take the Westminster off-ramp from the 405, that'll let you off at the In-N-Out we ate at. Aww hell, I'll PM you my addy for the mapquest. And 10-11 sounds good....that should be after the morning commute is over. But I should be home most of the day. Gimme a call when you get close.
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top